TCS AMI K3 Series, Product Information

Page: 11 / 20

01/2013 11
TCS TürControlSysteme AG, TCS Hotline Germany: hotline@tcsag.de Subject to technical changes.
Fax: +49 (0) 41 94 / 9 88 129

www.tcsag.de PI_AMI1xx00_uk
… with heavy-duty anchor … with ground anchor

Use the base plate of the post as stencil to
mark the drill holes.

Drill and clean drill holes.

Drive the heavy-duty anchor flush into the foun-
dation.

Insert the connection cable provided by cus-
tomer as well as the earthing through the base
plate of the post.

Concrete the ground anchor vertically in
the ground, concrete height 20 mm below
the upper edge of the ground anchor.

Remove the protection caps.

Insert the connection cable provided by
customer as well as the earthing through
the ground anchor and the base plate of
the post.

Fix the base plate with 4 cheese-head screws with a key for hexagon socket screws 8 mm (not
enclosed in the delivery / length of the screws see the illustration above).
!
Ensure that the connection cable provided by customer is not clamped or damaged!
Dismount the post roof

Loosen and remove the 4 countersunk
screws in the post roof with the en-
closed allen key.

Remove the roof of the post.

Put down the roof on clean ground.
Open the post
profile

Loosen the two knurled screws which are lo-
cated on top in the inside of the post corpus.

Push out the upper back panel .
countersunk screw
post roof
upper back panel
knurled screw
cheese-head
screws M10x75
base plate
post corpus
heavy-duty anchor
ground anchor
cheese-head screws
M10x30
(encluded in the
delivery ground
anchor)
20 mm distance
concrete height