R
2800 LAURA LANE • MIDDLETON, WI 53562 • (800) 288-9383 • FAX (608) 836-9044 • www.tcsbasys.com
6
program
setup
program
setup
program
setup
program
setup
program
setup
program
setup
program
setup
DI2 USED FOR:
SERVICE
DI1 USED FOR:
FAN PROVING
DISCHARGE AIR
HIGH LIMIT:
36.
35.
34.
DISCHARGE AIR
33.
LOW LIMIT:
32.
ENABLE DISCHARGE
AIR SENSOR?
31.
TIM ECLOCK OUTPUT
OCCUPIED=CLOSED
program
setup
30.
SET CONTROL
MODE:
REVERSING VALVE
OUTPUT
28b.
program
setup
27b.
COOL STAGE 2
2F
DIFF:
AUX HEAT STAGE 2
2F
DIFF:
120F
45F
YES
P+I
NO
program
setup
program
setup
program
setup
HEAT STAGE 1
2F
DIFF:
COM P STAGE 1
1F
21b.
DIFF:
HEAT STAGE 1
OFFSET:
0F
COM P STAGE 1
20b.
OFFSET:
0F
ENABLE THIRD
COOL
STAGE AS:
ENABLE STAGE 2
YES
AUX HEAT?
19b.
program
setup
program
setup
program
setup
program
setup
program
setup
COOL STAGE 2
OFFSET:
2F
26b.
AUX HEAT STAGE 2
OFFSET:
4F
COOL STAGE 1
2F
DIFF:
25b.
AUX HEAT STAGE 1
1F
DIFF:
COOL STAGE 1
OFFSET:
0F
24b.
AUX HEAT STAGE 1
OFFSET:
3F
23b.
HEAT STAGE 2
2F
DIFF:
COM P STAGE 2
1F
DIFF:
HEAT STAGE 2
OFFSET:
2F
22b.
COM P STAGE 2
OFFSET:
1F
program
setup
18b.
ENABLE STAGE 1
AUX HEAT?
YES
First Stage Auxiliary Heat Screen.
Choose whether the thermostat will
control a first stage of auxiliary heat.
(Select NO if not using a first stage of
auxiliary heat.)
Second Stage Auxiliary Heat Screen.
Choose whether the thermostat will
control a second stage of auxiliary heat.
(Select NO if not using a second stage of
auxiliary heat.)
Compressor Stage 1 Offset Screen.
Enter an offset value for compressor
stage 1. First stage is normally 0 offset.
Compressor Stage 1 Differential
Screen.
Enter a differential value for
compressor stage 1.
Compressor Stage 2 Offset Screen.
Enter an offset value for compressor
stage 2. This screen only appears if
compressor 2 is enabled.
Compressor Stage 2 Differential
Screen.
Enter a differential value for
compressor stage 2. This screen only
appears if compressor stage 2 is
enabled.
Auxiliary Heat Stage 1 Offset Screen.
Enter an offset value for cool stage 1.
This screen only appears if auxiliary heat
stage 1 is enabled.
Auxiliary Heat Stage 1 Differential
Screen.
Enter a differential value for
auxiliary heat stage 1. This screen only
appears if auxiliary heat stage 1 is
enabled.
Auxiliary Heat Stage 2 Offset Screen.
Enter an offset value for auxiliary heat
stage 2. This screen only appears if
auxiliary heat stage 2 is enabled.
Auxiliary Heat Stage 2 Differential
Screen.
Enter a differential value for
auxiliary heat stage 2. This screen only
appears if auxiliary heat stage 2 is
enabled.
Reversing Valve Output Screen.
Enter
whether the reversing valve output will be
open (NO) or closed (NC) for cooling.
Control Mode Screen.
Enter whether
you want to control by temperature only
(P) or add a time factor (P+I).
Time Clock Output Screen.
Choose
whether the auxiliary output will be OPEN
during occupied periods (and closed
during unoccupied periods) or CLOSED
during occupied periods (and open during
unoccupied periods).
Discharge Air Sensor Screen.
Choose
whether or not you are using a discharge air
sensor function. To monitor only, select no. See
setup instructions for dipswitch settings which
must also be set.
Discharge Air Low Limit Screen.
Enter
a discharge air low limit value. This
screen will not appear if the discharge air
sensor function is disabled.
Discharge Air High Limit Screen.
Enter
a discharge air high limit value. This
screen will not appear if the discharge air
sensor function is disabled.
DI1 Choice Screen.
Choose DI1 as FAN
PROVING or a MONITOR point. Select
MONITOR if unused.
DI2 Choice Screen.
Choose DI2 as
SERVICE, COOL LOCKOUT, or
MONITOR. Select MONITOR if unused.
