CONNECTING THE APPLIANCE TO WI-FI
Use the QR code below to download the TCP Smart App for control of the heater by voice or TCP
Smart App.
QR code for both android and iOS
To control the heater using the TCP Smart App the unit must be turned on.
Before you get started you will need the following:
• Smart device such as a mobile phone or tablet
• Access to the Google or Apple App store, log on and passwords
• The name of your Wi-Fi network and password to your Wi-Fi network
• Confirm your home Wi-Fi router is running on 2.4Ghz and not 5Ghz. If you are unsure,
please consult your broadband provider for details on how to change the settings.
• Turn off any Wi-Fi extenders during set up
• Check you do not have any limitations on the number of devices with your broadband
provider
Please note: Our products do not work on 5Ghz only 2.4Ghz.
For instructions on how to connect to Amazon Alexa or Google Nest please visit https://www.
tcpsmart.eu/how-to-alexa-google-nest
With the heater turned on, hold down the Mode button
for 3 seconds until it bleeps and
the W i Fi LED light blinks rapidly, the device is now in paring mode. In the TCP Smart App, enter
your WiFi password and follow the instructions in the App to connect.