OPERATING THE RADIATOR
Manual Settings using the L D screen
Choose a suitable location for the Heater, taking into account the safety instructions above.
ON/OFF BUTTON
Press once to turn the device on. Press again to turn the device off.
This feature can be performed using the TCP Smart App.
Please note: The fan will continue to emit heat for 60 seconds before turning off completely.
MODE SELECTION
Press this button to cycle between the following options:
Press
to enter mode selection. By pressing
, the heating mode runs in a continuous cycle as
above:
-
Comfort mode
: Press
and
to set the temperature from 10-35
o
C.
ECO mode
: This is pre-set as 4
o
C below comfort mode.
Anti-frost mode
. To avoid damage to the product during extreme cold weather use anti-frost mode.
The heater must be turned on and Anti Frost mode selected for this function to work. The screen will
display
. The target temperature is 7
o
C. The temperature cannot be adjusted.
Pre-programmed scheduling
– Select to run the programme as stated below.
Pre-Programmed scheduling
- Select to run the programme as stated below.
Programmable scheduling
– Select to create a programme to suit your own requirements.
This feature can be performed using the TCP Smart App.
P1, P2 and P3 Programmed scheduling
–
- Note: Clock and day of the week setting must be done for the below scheduling to work.
(Monday-Sunday) Pre-programmed schedule. Please note: this schedule cannot be adjusted
.
-
-
00:00am
– 01:00am
comfort mode,