Test and Alignment Specification for MT58 Series (v0 01)
160523
Page 8 of 26
Note
④:
Because more and more projects will be added in the future.
1.5. Functional Test
Once the boards (chassis, KB, IR, PSU…) and the panel are well interconnected, plug all external generator
devices to relevant below inputs/outputs using respective test patterns format to check picture and sound quality:
Source
Test Signal
Test Pattern
Analog /Digital Tuner
(VHF/UHF & CATV)
RF cable generator
2D - Movie 1280x720
2D - Static Picture 1920x1080
1.
Frequency Range: full band
2.
Standard: PAL / SECAM
3.
DVB-T/T2/C
Satellite Tuner
- DiSEqC v1.0 (A, B, C, D) and Tone
Burst (A, B)
- Double LNB frequency (band change
by 22KHz Tone)
Compliant DVB-S/S2
source from generator or
dish antenna with switch
2D - Movie 720x576
1.
Frequency Range: 950MHz..2150MHz
2.
Symbol Rate Range:
DVB-S 1..30MHz (for QPSK)
DVB-S2 1..45MHz (for QPSK)
1..30MHz (for 8PSK)
3.
LNB Voltage Range:
Vertical 12.85V..14.2V
Horizontal 17.6V..19.5V
4.
22KHz Tone Range
Frequency 20.5KHz..23.5KHz
Amplitude 400mV..900mV
Current ≥400mA
SPDIF
(coxial)
Audio Amplifier
PCM or Dolby D+
PCMCIA
CI CAM card adaptor
Conax, Irdeto, Viaccess, …
CMP
via mini jack adaptor
(YPrPb & Audio)
Chroma/QuantumData
generator
1920x1080i@60Hz
Half Color & Gray bars
AV
IN
share with Y,R,L
(CVBS & Audio)
Chroma/ QuantumData
generator
1920x1080i@60Hz
Half Color & Gray bars
