TCL RP466CXF0, Operating Instructions Manual

Page: 14 / 162

EN
12
Disassembly and assembly method of accessory
--Glass shelf in the refrigerating chamber: the height of the shelf is
adjustable, which facilitates the storage of articles with different
volumes. Pull the shelf outwardly and upwardly in a slight way to
take out.
--Fruit and vegetable box: for storing vegetables and fruits. It can
be taken out by pulling outwardly.
--Drawer in the freezing chamber: storing foods to be preserved for
long-term, such as meat and fish. It can be taken out by pulling
outwardly and lifting upwardly.
Handy tips : It is recommended to put into the large piece of meat
after being cut into small pieces, to avoid difficult cutting after being
frozen. The quick-freezing foods shall be distributed uniformly and
stored together after being frozen.
--Bottle pedestal at the refrigerating door: storing eggs, various
bottled drinks and other sundries. It can be taken out by being lifted
up slightly.
Note: Don't pull out the bottle pedestal at the refrigerating door
forcibly during disassembly, to avoid damaging the refrigerator.
Take out by pulling upwardly
and outwardly in a slight way
Take out by pulling outwardly
and upwardly in a slight way
Gently pull and get out along
the reverse direction of arrow
--Components of water storage box: Used for storing the water
yield needed by the water dispenser for the purpose of taking
the drinkingwater.
--Water-adding of water storage box: Firstly, open the box
cover of water storage box by hand, then, pour the water into
the water storage box from the container with water. After
adding the water, close the box cover of water storage box.
--Installation of components of water storage box: Before
installing the water storage box, firstly, cover the water
storage box firmly and reliably, then hold the both sides of
the water storage bucket by hand with balanced force, and
slowly press along the arrow direction until it cannot be pressed.
--Disassembly of components of water storage box: The disassembly method of the water
storage box is same with the installation method. Just implement it in the reverse direction.
★★
Warm prompt:
When adding the water in the water storage box, the water addition cannot exceed the tip line
of maximum water storage scale;
To ensure the water quality, it is suggested to clean the water storage bucket and outlet water
pipe regularly.
During the maintenance and cleaning of water storage box and pipes, it is suggested to
disconnect power supply to avoid the accident.
Pay attention to the operating strength when opening the door,
rest the water in the storage tank
overflowed by opening the door too fast.