General
Operation
First Time Setup
involves selecting all the settings
required to be able to search for and store all the
channels you can receive. Make sure that the television
is switched on and follow all the steps in turn specified
hereafter.
The first time you switch the set on, the
First Time Setup
wizard opens, which guides you through the initial setup
process.
Press the up or down direction button to select
Auto
Scan
and press the
OK
or right direction button to
start the search automatically. All available TV
programmes are stored. This operation takes a few
minutes. The display shows the progress of the search
and the number of programs found.
Note:
to prevent the channel setup process from being
interrupted, wait for the message indicating that the
setup is completed.
In this step, you can also select
Exit
to skip the
channel search progress. But when you turn the TV on
next time, the prompt on the screen will remind you to
do the channel scan first.
Note:
the
Store
mode does not satisfy the MEPS
certification, suggest selecting
Home
.
First Time Setup
2. Press the left or right direction buttons to select the
desired item, then press the
OK
button to open the
corresponding submenu.
3. In submenus, use the up or down direction button to
select menu options, use the left or right direction button
to set functions or change values. Use the
OK
button
to activate a setting. Use the
OK
or right direction button
to open the corresponding submenu.
4. Press
Menu
to return to the previous menu or press
Exit
to close the menu.
Using
Menu
System
This section explores the menus of your TV. Each menu
is outlined and detailed to help you get the most from
your TV.
8
To access the menu system:
1. Press the
Menu
button to display the main menu.
1.
select
Channel>Tuner Type(Satellite, Antenna, Cable)
,
then press the left
or right direction button to select the
tuner type.
2.Select
Auto Scan,
then press the
OK
or right
direction button to enter.
3. Select
DTV & ATV
(or
DTV
or
ATV
),
then press the up/down
direction button to highlight the
Start,
press the
OK
or right direction button
to
start the
automatic search process.
The search may take a few minutes. During the
process, you can press
Menu
or
Exit
to abort halfway.
Press the
Menu
button to display the main menu, and
Auto Scan
This option allows the TV to search for, find and store all
the available analog and digital channels.
Follow all the steps in turn specified hereafter.
This
allows
you
to
update
all
available
channels
,
without
altering
the
sorting
of existing
channels
.
(only available in
DTV mode)
1. Display the
Channel
menu, press the up or
down direction button to highlight
Auto Channel
Update
option.
2. Press the left or right direction button to select
On/Off
to update the channel.
Automatic
Update
First Time Setup
Auto Scan
Hue
