TCL LED40D2900AS, Operation Manual

Page: 10 / 32

General Operation
Analog Manual Scan
1.
direction button to highlight
manual scan , press the
OK or right direction button to enter. Then press the
up or down direction button to highlight Analog
Manual scan. Press the OK or right direction button
to enter.
2. Press the up/down/left/right direction and number
button to set, then press the up or down direction
button to highlight Start. Press the
OK or right
direction button to search.
3. Press
Menu to return to the previous menu or press
Exit to close the menu.
Display the Channel menu, press the up or down
Antenna Manual Installation
Allows you to start manual searching the available
channels from the current frequency or any frequency
you input.(Only for digital channels)
1. Display the
Channel menu, press the up or down
direction button to highlight Manual Scan , press the
OK or right direction button to enter. Press the up or
down direction button to highlight Digital Manual
Scan , press the OK or right direction button to enter.
2. Press the left or right direction button to select the
frequency or use the digit key to input a channel,
then highlight
Start , press OK or right direction
button to search.
3. When the search is completed, press Menu to return.
9
Satellite Manual Installation
3. Press the up or down direction button to highlight the
trasponder, press
OK to select it. Then press the blue
button and press OK to search.
4. Allows you to add/edit/delete or a transponder below the
note on the OSD.
1. Display the Channel menu, press the up or down
direction button to highlight Tuner Type , press the
left or right direction button to select Satellite .
2. Press the up or down direction button to highlight
Satellite System , press the OK or right direction
button to enter. First select a satellite, then press
the right direction button to enter.
Common interface : press the right direction button
to select CI card.
Signal Information on DTV channels
1. Select Channel > Signal Information .
2. Press the OK or right direction button to display some
signal information on current digital channel, such as
signal strength, Freq.(MHz), etc..
Cable Manual Installation
1. Display the Channel menu, press the up or down
direction button to highlight Tuner Type , press the
left or right direction button to select Cable .
2. Press the up or down direction button to highlight Manual
Scan , press the OK or right direction button to enter. Press
the up or down direction button to highlight Digital Manual
Scan , press the OK or right direction button to enter.
3. Use the digit key to input a frequency, then highlight Start ,
press OK or right direction button to search. When the
search is completed, press
Menu to return.
After the automatic search, channels are arranged in a
preset order. You can skip channels, modify the preset
order and delete channels.
Skip channels : if a channel was stored twice or
its reception is poor, you can simply skip it. The
skipped channels can not be selected by pressing the
PROGRAM UP /DOWN button.
Display the Channel menu, press the up or down
direction button to highlight Channel Edit.
press the OK or right direction button to enter.
Press
the up or down direction button to select a
channel and press the green button to skip.
Delete Channels : Press the up or down direction
button to highlight a channel, then press red button
to delete.
Channel Edit
Frequency
Strength
514.00MHz
0