TCL LED40D2900AS, Operation Manual

Page: 12 / 32

11
Advanced Functions
EQ mode : Off/Pop/Rock/User/Jazz can also use the
left or right direction button to adjust the level of every
frequency.
SPDIF : Use the left or right direction button to select a
format for SPDIF output.
Sound type (only available in DTV mode) : use the left
or right direction button to select a sound type from the
list .
AVL : select On mode to reduce the annoying blasts in
volume during commercial breaks and also amplifies
softer sounds in program material. Eliminates the need
to constantly adjust the volume.
Note: the options offered depend on the program you
are watching.
Selecting a Signal Source
Press Source button on the remote control to
enter Source menu directly.
1.Press the up or down direction button to select
your desired source.
Note: The available source might differ
depending on the model.
2. Press the OK button to confirm the selection.
Using the Lock System
The Lock options are as below:
Channel Locks : this option allows you to lock a certain
TV channel. Highlight Channel locks , press the OK or
right direction button to display Channel lock menu.
Use the up or down direction button to select a certain
TV channel you want to lock, then press the
OK button
to lock. To unlock, use the same operation.
Parental Rating : this option allows you to set a rating
to a program. Highlight Parental rating . Then use the
left or right direction button to adjust.
Lock Keypad : this option allows you to lock the set's
buttons, press the left or right direction button to select
On to lock the set's buttons.
New Password : this option allows you to change the
password. Press the number button to input the new
password twice to set the new password.
Clear Lock : this option allows you to initialize the Lock
System. Press OK or right direction button to initialize
the Lock System.
Setup
OSD Language : Use the left or right direction to select the
OSD Language.
Audio Languages : use the ok or right direction to enter.
This menu can control the special function for TV
channels.
Note: you must enter the password before Entering the
Lock menu.
Display the main menu by pressing
Menu and select
Lock System , then press OK to confirm. Then press
the number button to enter the password to enter the
Lock menu. The factory default code is 0000. And the
super password is 8899. If you forget your code, enter
it to override any existing codes.
YPbPr
OSD Language
Audio Language
Subtilte
Teletext
Blue Screen Off
Mode Setting Home Mode
Time Settings
PVR Settings
English
Lock System
Enter Password ---
Enable On
Channel Locks
Parental Rating 5+
Lock Keypad Off
New Password ----
Clear Lock