background image

6

Option 1: WPS button

1. Press the WPS button on your CPE for 3 seconds.
2. Enable the WPS function of your wireless device within 2 minutes to make a WPS 

connection.

Option 2: PBC

1. Log in to the web user interface (UI) of your CPE, and go to 

Devices settings

 > 

Wi‑Fi 

settings

. (For more information on how to log in to the web UI, see "Chapter 3.  Access 

the web UI" on page 7.) 

2. Choose 

Enabled

 for WPS switch, and click 

Apply

.

3. Go to 

Add new devices

 and choose PBC; enter the new device information you want to 

connect to the CPE. Click 

Apply

.

Option 3: WPS PIN code

1. Log in to the web user interface (UI) of your CPE, and go to 

Devices settings

 > 

Wi‑Fi 

settings

. (For more information on how to log in to the web UI, see "Chapter 3.  Access 

the web UI" on page 7.) 

2. Choose 

Enabled

 for Current PIN switch, and click 

Apply

.

3. Check the PIN code from the Current PIN.
4. Enter the PIN code when the device attempts to connect to the CPE. Click 

Reset PIN 

code

 to reset the PIN code, you can find the default PIN code from the label located on 

the bottom of the device. Click 

Random PIN code

 to change the PIN code.

2.5  Use the telephone function (For HH40L1 only)

Your CPE supports telephone functionality. Connect a telephone to your CPE using a 

telephone cable as illustrated below. 

Summary of Contents for HH40L1
























Reviews: