⑤
Start/Pause: Press to start the drying program. Press again to pause the drying program
④
Function selection field
When the “Steam Dry”, “Cool Air” or “Warm Air” program is selected, this
button can be used to adjust the drying time with an increment of 10
Drying Time
Semi drying: the clothes will be semi-dried after completing the program;
Standard-drying: the clothes will be fully dried and can be put on directly;
of a drying program.
2. When the button is pressed repeatedly, the dry level cycles from
For adjusting the dry level of clothes. There are three levels available,
namely, semi-drying, standard-drying and extreme-drying;
1. The dry level button can be pressed for selection only before the startup
Dry Level Selection
semi-drying, standard-drying to extreme-drying.
Extreme-drying: the clothes will be over dried and can be stored;
Adjustment
minutes.
Child Lock Function
This function can be used to effectively prevent the misoperation by
children.
The specific settings about "how to unlock 'Child Lock'" are as
follows:
program
Temp.
Dry Level
Power on
the dryer
Select the
program
Start-up
Press the dry level and temperature
button at the same time for three
seconds to activate the chil lock.
Dry Level
Time Dry
Child Lock
Anti-Wrinkle
Mute Dry
1
3
When the “Child Lock” is enabled, the dryer cannot by controlled by pressing any key,
except for the power button. To control the dryer, the “Child Lock” shall be unlocked
Mute Dry Function
The mute dry can be activated by selecting this function and can be deac-
tivated by selecting this function again.
Anti-Wrinkle Function
This function can be selected to prevent the winkles of clothes that are
not timely taken out after the completion of the program. In this function,
the dryer will automatically run intermittently for 120 minutes.
Delay Function
After
enabling
this
function,the
scheduled
time
will
be
displayed.
After
reaching
the
time,the
program
will
start
to
run
and
dispaly
there
maining
drying time.
Temperature Selection
40
℃
, 50
℃
and 60
℃
are available for selection.
first.
Note
Delay
Temp.
