L2 Repair Document
TCL
Communication Ltd.
Rev.
A570BL & A571VL Level 2 Repair Document
Page
1.0
22/35
All rights reserved. Transfer, copy, use or communication of this file is prohibited without authorization.
Disassembly Notice:
1) Take care not to damage several FPCs when you are using plastic flake to separate the furnished
frame from the furnished front casing.
2) Be careful not to damage TP FPC and LCD FPC during disassembly process.
3) Put all the spare parts on right position (don’t let all the spare parts mixed and put on the clean place to
avoid vitiated or stained for each spare part) after disassembly.
4) For packaging method please refer item “APPENDIX 1 Packaging Requirements”.
5.4 Reassembly Process
Please make reference to the disassembly process for assembly reverse an order of the disassembly
steps.
Attention:
¾
When assembling main PCBA, make sure the sub camera, camera rubber, vibrator are well
installed firstly.
¾
Please notice the distinction between the anode and the cathode when assembling vibrator and
speaker.
¾
When assembling the FPC with LED on it, make sure the fixed position is right install.
¾
When assembling furnished frame, make sure the main camera, TP FPC, LCD FPC, vibrator and
speaker are well installed firstly.
¾
When assembling screws, don’t twist them too hard.
¾
Before assembling battery cover, please check whether there’s any deformation or damage for the
buckles; if yes, replace it with a new battery cover.
