background image

12

Connections and Setup

Setup Wizard

Perform the following steps before you press 

 

 on the remote 

control unit.
•  Insert the batteries into the remote control unit. 

•  Connect the antenna cable to the TV. 

•  Plug in the AC cord to the AC outlet.
The first time you switch the set on, the 

Setup Wizard

 opens, 

which guides you through the setup process. 
1.  The first step of the setup requires you to select your 

preferred language for the menu system. Press ▲/▼ to 

select your language, then press 

OK

 to enter the next 

screen.

2.  A menu screen asks you to set the power on mode.

•  Choosing “Home Mode” for the TV assigns the optimal 

picture settings for most home environments. 

•  Choosing “Retail mode”, which is not ENERGY STAR 

compliant, sets the unit up with predefined settings for 

retail displays. In this setting, the power consumption 

may exceed the requirements of the ENERGY STAR® 

qualification.

1.  Use ▲/▼ to select the desired location setting (“Home 

Mode” or “Retail mode”); then press 

OK

 to continue to the 

next screen.

Note: 

if you select “Retail Mode”, a screen menu will 

display to ask you go back to the previous menu to select 

“Home Mode” by pressing ◄ to select 

Go Back

 and press 

OK

 to confirm , or you can select “Proceed“ to proceed to 

the next screen.

2.  Use ▲/▼ to select the current local time zone. Press 

OK

 

to continue to the next screen.

3.  Select either “Antenna” or “Cable/Sat” as the channel scan 

type. Press 

OK

 to begin the channel scan process. 

Note: 

Make sure what kind of connection is made with 

your TV when selecting “Antenna” or “Cable/Sat”. 

4.  The screen will change to show the progress of the channel 

scanning process, available channels will be stored in the 

TV’s memory.

Note: 

If you do not want to scan for channels at this time, 

you can press 

CLEAR

 or 

MENU

 to exit the scanning 

process, and perform the channel scan later in the “Setting” 

menu.

If you are using a cable set-top box and connect using the 

RF connection, you do not have to complete the Channel 

Scan. You can simply tune to channel 3 or 4 on the TV, 

then use the remote that came with yout cable/satellite 

box.

5.  When the scanning is finished, the unit will switch to the 

first channel found.

Summary of Contents for 50FS4690





























Reviews: