Page
67
What if I can’t access the Factory Reset option?
It is possible that your TV might get into a state where you cannot access the various menus, including
the menu option that lets you perform a factory reset operation. If that happens, you can force the TV
to reset by following these steps:
1.
Using a straightened paper clip or ball-‐point pen, press and hold the recessed RESET
button on the TV connector panel.
2.
Continue to hold the RESET button for approximately 12 seconds.
During this time, the status light turns off, and then turns on bright, and then pulses.
When the reset cycle completes, the light either comes on dim (if the TV power was
off when you started) or the TV screen comes on and the light turns off (if the TV
power was on when you started).
3.
When the status light turns on steady dim or the TV screen comes on, release the
RESET button.
4.
Proceed through Guided Setup. See “
5.
Setting up your TCL•
Roku TV” on page
14
.
