Page
30
Scanning for channels can take several minutes.
Tip
:
Repeat the channel scan from time to time to make sure you are receiving all of the latest
channels. Broadcasters add and remove channels, move channels to different parts of the
spectrum, and change the power levels of their channels periodically.
Note
: You’ll have to repeat the channel scan if you remove the
Antenna TV
tile from the
Home
screen or perform a factory reset. To repeat the channel scan at any time, go to
Settings > TV
inputs > Antenna TV > Scan again for channels
. Your antenna reception and picture quality
depend on the position of your antenna and on your location relative to the antennas of
broadcasters in your area.
Now, you’re ready to watch broadcast TV! While you’re watching, try the following:
•
Press
UP
or
DOWN
to change channels.
•
Press
LEFT
to display the channel list and then use UP and DOWN to select a channel to watch.
Or press
REWIND
or
FAST FORWARD
to jump through the channel list a page at a time.
•
Press
OK
to display information about the current program.
•
Press to switch to the previously tuned channel.
•
Press
Þ
to see options for picture and sound settings.
Note:
If is not available on your remote control, you can use on the Roku App or the Jump
Back button on a universal remote. For more information, see “
Other devices
” on page
70
.
“
Roku TV Remote control
” on page
32
has more information on using the remote control buttons while
watching TV.
