2
IMPORTANT
Before You Begin Register This Product.
For future reference, record the model name, model number, date of manufacture and purchase date of
this product. You can find this information on the product.
Model Name
_________________________
Model Number
_________________________
Date of Manufacture
_________________________
Date of Purchase
_________________________
OWNER / USER RESPONSIBILITY
DO NOT OPERATE OR REPAIR THIS PRODUCT WITHOUT READING THIS MANUAL.
Read and follow the safety instructions. Keep Instructions readily available for operators. Make certain all
operators are properly trained and understand how to safely and correctly operate the product. By
proceeding you agree that you fully understand and comprehend the full contents of this manual. Failure
to operate this product as intended may cause injury or death. The manufacturer is not responsible for any
damages or injury caused by improper use or neglect. Allow product operation only with all parts in place
and operating safely. Use only genuine replacement parts. Service and maintain the product only with
authorized or approved replacement parts; negligence will make the product unsafe for use and will void
the warranty. Carefully inspect the product on a regular basis and perform all maintenance as required.
Store these instructions in a protected dry location. Keep all decals on the product clean and visible. Do
not modify and/or use for any application other than that for which this product was designed. If you have
any questions relative to a particular application, DO NOT use the product until you have first contacted
the distributor or manufacturer to determine if it can or should be performed on the product.
For technical questions please call 1-888-448-6746.
INTENDED USE
Jack Stands are designed to support rated capacity, partial vehicle loads consisting of one end of a vehicle.
Use both stands for each operation.
TECHNICAL SPECIFICATIONS
Item Number Capacity Lifting Range
Min. (Inch)
Lifting Range
Max. (Inch)
Lifting Range
Min. (mm)
Lifting Range
Max. (mm)
TCE44008
4 Ton
12.20
18.90
310
480
TCE47008
7 Ton
20.08
31.10
510
790
Safe Operating Temperature is between 40°F
– 105°F (4°C - 41°C)