TCE Group S.r.l.
Installation, use and maintenance manual
–
Serie NEOS
26
DECOMMISSIONING
Device deactivation
The device is manufactured and built according to criteria of robustness, durability and flexibility that allow it to be used for many
years. Once it has reached the end of its technical and operational life, it must be put out of service in conditions where it can no
longer be used for the purposes for which it was designed and built at the time, making it possible to reuse the raw materials that
constitute it.
The same deactivation procedures must be observed in all the following cases:
•
Decommissioning of the device and storage in warehouse.
•
Final disposal.
NOTE
THE MANUFACTURING COMPANY DOES NOT ASSUME ANY LIABILITY FOR DAMAGES TO PERSONS
OR THINGS RESULTING FROM THE REUSE OF SINGLE PARTS OF THE DEVICE FOR FUNCTIONS OR
IN ASSEMBLY CONFIGURATIONS DIFFERENT FROM THE ORIGINAL ONES.
THE MANUFACTURING COMPANY REJECTS ANY ACKNOWLEDGMENT, IMPLIED OR EXPRESS, OF
ELIGIBILITY FOR A SPECIFIC PURPOSE OF PARTS OF THE DEVICE REUSED AFTER THE DEFINITIVE
DEACTIVATION FOR ITS DISPOSAL.
Disposal
The possibility of reusing some parts of the device is subject to the total responsibility of the user.
The label shows the symbol indicated in Legislative Decree no.49 of 14 March 2014 which transposes Directive 2012/19 / EU,
which indicates the need to dispose of the product in differentiated waste, specifically in waste of electric and electronic type.
Refer to the waste collection center located in your area. Specific symbol:
NOTE
THE MANUFACTURER IS NOT RESPONSIBLE IN ANY WAY FOR DAMAGES CAUSED BY THE DEVICE
IF NOT USED IN THE INTEGRAL VERSION AND FOR THE USES AND METHODS OF USE SPECIFIED IN
THIS MANUAL.
THE MANUFACTURER IS NOT RESPONSIBLE IN ANY WAY FOR ANY DAMAGE TO PERSONS OR
THINGS RESULTING FROM THE RECOVERY OF PARTS OF THE DEVICE USED AFTER ITS DISPOSAL.
