TCE Group S.r.l.
Installation, use and maintenance manual
–
Serie NEOS
13
DESCRIPTION and INTENDED USE
The SE / EVO series identifies 50hz products having as control an electronic board that determines the timers as regards the
charging cycle and a dispersed flux power transformer that guarantees the decreasing current curve during the charging
phase.The SE / EVO series identifies 50hz products having as control an electronic board that determines the timers as regards
the charging cycle and a dispersed flux power transformer that guarantees the decreasing current curve during the charging
phase.
TECHNICAL DATA
Mechanic data
Dimensions (mm)
SE (502x384x607h), EVO (374x514x856H), BIG (623x561x860H)
Weight (kg)
May variate based on the model / series
Grado di protezione
IP21
Electrical data
Power Supply (V)
Ref. device serail number label
Frequency (Hz)
50/60
Absorbed current (A)
Ref. device serail number label
Power (W)
Ref. device serail number label
Electrical safety class
Class I
–
groounded
Cable
Ref. Pag. 14
Connectors
Not included
The charger is equipped with several safety devices to ensure reliable and safe use.
The safety devices are used to protect the battery, the charger and the surrounding environment.
The control board offers safety on the charging cycle, as it monitors the various charging phases making sure that the recorded
and read values are always within an optimal range for the connected battery.
The fuse installed inside the device offers protection against short circuit and reverse polarity.
All TCE Group S.r.l. devices are equipped with different timers to provide reliability during nighttime charges or during weekends.
UNINTENTED USE
No use other than those described in the
DESCRIPTION
and
INTENDED USE
paragraph is allowed.
It is also absolutely forbidden:
•
The use of the device with power supply networks other than those supported (
see Technical data
).
•
The use of the device for applications that differ from those indicated.
•
Tampering with the components of the device (hardware).
•
Use the device with incompatible accessories.
•
Use the device to recharge batteries other than lead-acid ones for traction and semi-traction.
•
Use the device without installing the DC plug
The reuse of any unit after decommissioning the device relieves the manufacturer of any liability arising from the use of the same.
NOTE
THE MANUFACTURER CANNOT BE HELD IN ANY CASE LIABLE FOR ACCIDENTS OR DAMAGES
RESULTING FROM UNINTENDED USE OF THE DEVICE. ANY UNINTENDED USE ALSO LEADS TO THE
TERMINATION OF THE WARRANTY TERMS COVERAGE.
