Getting to know VL3X
VL3X – Reference manual (updated 2015-07-16) 89
Expression Pedal tab: Getting the most out of your expression pedal
If you have connected an expression pedal to
your VL3X, you can define what the expression
pedal should control in each Preset.
Being able to define the expression pedal “tar-
get” in each Preset gives you a lot of flexibility
from one pedal.
Setting the Expression Pedal target
►
Use the Expression pedal parameter to choose
from many controllable “targets”.
►
Use the Exp MinPos parameter to define the
parameter value that should be associated
with the minimum (down) position of the ex-
pression pedal.
►
Use the Exp MaxPos parameter to define the
parameter value that should be associated
with the maximum (up) position of the expres-
sion pedal.
The MinPos and MaxPos parameters can be
useful when you would like to limit the effective
range of the pedal.
For example, if you assign the expression ped-
al to control harmony volume, you may want the
harmonies to turn down slightly when you rock
the pedal all the way back – but not turn them off
completely. To achieve this effect, you would set
MinPos to something higher than 0% (try some-
thing like 50 or 70%). This allows you to make
large (easy to perform) movements with the ped-
al without changing the level of the harmonies
too drastically.
Setting Expression Pedal MinPos and MaxPos
It can be useful to limit the expression pedal
range for parameters such as Guitar Volume,
Harmony Volume, Delay Feedback, Rhythmic
Depth etc.
Working with a second expression pedal
If you want to, you can use a second expression
pedal with your VL3X. Connect this second Ex-
pression pedal to the Footswitch jack.
As opposed to the expression pedal connected
to the Expression jack (which can be used dif-
ferently in each Preset), the pedal connected to
the footswitch jack only has a global setting – it
will control all Presets in the same way. To use a
second expression pedal:
►
Press Setup.
►
Navigate to the Buttonmap tab.
►
Select the Footswitch Jack parameter and set
it from Switch-3 to Expression pedal.
Calibrating your expression pedal
If you are connecting an expression pedal, it
must be calibrated.
►
To enter the calibration screen, press the Set-
up button.
►
Use the < and > arrows to navigate to the
“Pedal Calibration” tab.
Expression Pedal Calibration
►
Follow the on-screen instructions.
The Preset tab
The Preset tab allows you to make changes to
the Preset as a whole.
Most importantly, you can adjust the overall lev-
el of the Vocal or Guitar signals within a Preset.
This allows you to balance your Presets so they
all have the same apparent volume.
Summary of Contents for VL3X
