TC-Helicon VL3X Reference Manual Download Page 73

Page: 73 / 196

Getting to know VL3X

VL3X – Reference manual (updated 2015-07-16) 70

Defining the Global Preset

►

Press the Setup button.

►

Use < or > to navigate to the System tab.

►

Use the Control Knob to highlight “Global Pre-
set”

►

Use the Mix Knob below “Global Preset” to
change its value to represent the Preset num-
ber you would like as your Global Preset.

Using an effect from

the Global Preset

►

Select a Preset that you would like to link to
the Global Preset.

►

Press the Vocal or Guitar button (depending
on which effect you would like to edit).

►

Navigate to the effect tab for the effect that
you would like to link to the Global Preset –
e.g. Delay.

Delay effect block settings

►

Use the Control Knob to scroll down to the
“Global” parameter. It should say “Off”.

Global set to Off in the Delay block

►

Change it to “On” using the mix knob right be-
low the parameter.

Setting Global to On for the Delay block

►

Settings from the Global Preset will be applied
to this effect immediately.

►

You will also see that the tab name has
changed from “Delay” to “Delay-GBL” – indi-
cating that this particular effect is using Global
settings.

Summary of Contents for VL3X





































































































































































































Search results

Summary of Contents for VL3X

Reviews:

Related manuals for VL3X

Brands by name

Popular brands

TC-Helicon VL3X, Reference Manual

Search results

Summary of Contents for VL3X

Reviews:

Related manuals for VL3X

Brands by name

Popular brands