Quick Start Guide
ZEUS DRIVE OVERDRIVE
Legendary Dynamic Overdrive Boost Pedal with 2 Clipping Modes and
Optional Buffered Bypass
1.
OUT
– Send the signal to other pedals or a
guitar amp via ¼" cable.
2.
9 V DC
– Connect a standard 9 V power
supply (not included). The pedal does not
accept batteries.
3.
IN
– Connect your guitar via ¼" cable.
4.
DRIVE
– Adjusts mix and clipping of
drive circuit.
5.
LED
– Lights when the pedal is engaged.
6.
VOLUME
– Adjusts the output level when the
pedal is engaged.
7.
FAT
– Boosts the low frequencies and
reshapes the mids, giving a fatter tone.
8.
TREBLE
– Active tone control for the high
frequencies. The center position is neutral,
turning clockwise boosts highs, and turning
counterclockwise attenuates highs.
9.
FOOTSWITCH
– Press to engage or bypass
the pedal.
Note
– ZEUS Drive has 2 options for bypass type -
buffered bypass and true bypass. Remove 4 screws
on the side of the pedal and input/output nuts to
access the internal bypass type selector switch.
(1)
(4)
(6)
(7)
(9)
(5)
(2)
(3)
(8)
V 1.0
Slide switch to the right for True Bypass
Slide switch to the left for Buffered Bypass
Summary of Contents for ZEUS DRIVE OVERDRIVE
Page 5: ......