TC Electronic P2 Level Pilot, Administrator'S Manual

Page: 6 / 41

INTRODUCTION
Welcome
The P2 is a “set and forget” Loudness pilot and Limiter for Post production and Broadcast. It is
designed especially for fixed installations where a consistent loudness and spectral balance is
required but excels also in peak limiting functions.
Factory loaded with a broad selection of World Standard Presets the P2 can be used right out of the
box. However, via the TC Icon PC Editor, suitable presets can be built by the
Administrator and
various lock functions can be applied to ensure no unintended change of settings by the daily User.
Once setup and loaded with presets any person doing video editing, audio production, audio mixing
or tape-copying. Simply pick the predefined optimal preset and avoid having to think about audio
levels again.
4
Features
• Dual mono, Stereo and Wide Stereo
processing
• ALC - Automatic Loudness Control
• Filters and Parameteric EQ
• Live updatable Delay 0-1000 ms
• 5-Band Compression
• Brickwall Limiter
• 24 bit resolution Analog and Digital I/O
• 48 bit internal processing
• Sample Rate Conversion selectable
on/off
• All features mentioned available
simultaneously
Concept
• Audio editing for video
• Audio or tape copying
• Presets can be picked by non
technical personnel with full
confidence in output quality.
• Presets can be created by Audio
Expert via TC Icon Software Editor.
• Easy cloning of multiple P2’s via
standard PCMCIA card.
About this manual
The latest manual revision can always be downloaded via www.tcelectronic.com
If you have questions unanswered by this manual you may also try looking at our TC Support
Interactive site. This site is also accessed via www.tcelectronic.com