9
Bypass modes and Kill Dry on/off
Unscrew the back-plate and look for the two small dip-switches in the upper left corner.
The upper dip-switch (closest to the DC 9V in connection), switches between True Bypass mode
(default) and Buffered Bypass mode.
True Bypass
– is a hardwire bypass that gives absolutely no coloration of tone when the pedal
is bypassed. Using True Bypass on all pedals is a perfect choice in setups with a few pedals and
relatively short cables before and after the pedals.
Buffered Bypass
–
If you use a long cable between your guitar and the first pedal, if you use many
pedals on your board and if you use a long cable from your board to the amp, then the best solution
True Bypass
Buffered Bypass
Kill-Dry - off
Kill-Dry - on
