SELECT Switch
With the SELECT switch you select between:
• Program Change mode
-
Down position
• Control Change mode
-
Up position
• Off Mode
-
Middle position
• In
Program Change mode
you can send program changes to
any receiving MIDI device.
• In
Control Change mode
the G•Minor can be programmed to send out any
CC value via the UP and DOWN switch. When used with the G•Major or
G•Force various functions such as Effect block On/Off, Bypass All,
Relay 1&2 On/Off and other Effect specific parameters can be controlled.
• A
Setup Mode
for all MIDI settings etc. This mode is accessed from Off
mode (SELECT switch in middle position) by pressing the UP or DOWN
switch while turning the G•Minor on.
•
Tuning mode
can be accessed from both Control Change mode and
Program Change mode. It allows you to have a Tuner visible in the
G•Minor pedal but only when hooked up with a G•Major or a G•Force.
- connect G•Minor MIDI Out to G•Major/G•Force* MIDI In
- connect G•Major/G•Force* MIDI Out to G•Minor MIDI In.
* Please note that to utilize these functions with a G•Force, the G•Force must run software version 2.04
or higher.
7
OVERVIEW
