TC Electronic D-TWO, User Manual

Page: 17 / 31

15
RECALL - EDIT - STORE
Recall
Basic operation
• Press RECALL to enter the Recall page.
• Use the CONTROL wheel to select preset.
Blinking preset number and simultaneously
blinking ENTER key LED indicates that you
are previewing the preset and that it is not
yet recalled/activated.
• Press ENTER or RECALL to recall the
preset.
Preset types
User presets - RAM
User presets that can be edited and stored in
any User location. You can store up to 100
User presets.
Factory presets - ROM
Factory presets that can be edited and stored
in any User location. You cannot store presets
into a Factory location.
The D•TWO holds 50 Factory presets.
Edit
There are two groups of parameters to edit.
Parameters for the additional effects and the
Delay specific parameters.
Delay specific parameters
Click on the EDIT key. Use the ARROW
UP/DOWN keys to select parameter and use
the CONTROL wheel to change value.
Parameters in the additional effects
Double click on the effect key. Use the
CURSOR keys to select parameter and use the
CONTROL wheel to change value.
Store
Preset types
User presets - RAM
User presets that can be edited and stored in
any User location. You can store up to 100 user
presets in the User bank.
Factory presets - ROM
Factory presets that can be edited and stored
in any User location. You cannot store presets
into a factory location.
The D•TWO holds 50 factory presets.
Preset Locations
Presets can be stored in User locations only.
The Store page automatically suggests the first
free User location in the memory as storing
space unless the currently recalled preset is a
User preset. In that case the same User
location is suggested.
Storing an edited preset with the same
name at the same location
• Press STORE to enter the Store menu.
• Press ENTER twice to store the preset. The
display reads "Stored" shortly and returns to
the Recall page.
Storing a preset with the same name at a
new location
• Press STORE to enter the Store menu.
• Use the CONTROL wheel to select storing
location.
• Press ENTER twice to store the preset, the
display reads "Stored" shortly and returns to
the Recall page.
Storing a preset with a new name
• Press STORE to enter the Store menu.
• Select storing location using the CONTROL
wheel.
• Press the STORE key again or the ARROW
DOWN key to enter the” Naming” display.
• Use the ARROW keys to change cursor
position.
• Dial the CONTROL wheel to select
characters.
• Press ENTER to store the preset.
Available characters:
ABCDEFGHIJKLMNOPQRSTUVXYZ
abcdefghijklmnopqrstuvxyz
0123456789 /*-:."#$%&()_