TC Electronic D-TWO, User Manual

Page: 13 / 31

11
THE D•TWO DISPLAY
MIDI
Activity
LED PingPong
Indication Feedback
Filter Filter Edited
LED
Delay Time BPM/ms Subdivision
Dynamic Meter Tempo
Indication
Rhythm
Indication
Text Line Input
Meters
Preset
Number
Preset Bank
Indicator
Overload LEDs
Delay Time
The DELAY TIME indicator displays the main
Delay time in either ms or BPM (beats per
Minute= 60/ms*1000). When in Rhythm mode,
the DELAY TIME indicator, displays the total
time of the full pattern, or the total number of
subdivisions in the current Rhythm pattern.
Tempo Indicator
The Tempo indicator is blinking at the current
tempo (BPM/ms).
Rhythm Icon
The Rhythm icon is lit when the D•TWO is in
Rhythm mode.
Subdiv
Shows the current Subdivision being used.
Tap the beat in 1/4 notes and the D•TWO will
recalculate the Delay time in accordance to the
Subdivision. In Rhythm mode the Subdivision
sets the Quantization grid.
Example:
Tap 500ms (120 BPM measured in 1/4 notes)
with the Subdivision set to 1/8. The D•TWO
recalculates the Delay time to 250ms. To set
the recalculated Delay time press EDIT and use
the CURSOR keys to select the Delay time
parameter.
Dyn
The Dynamic Delay is a ducking function that
reduces the Output level of the Delay with a
specified level (Damping) when the Input signal
exceeds a certain Threshold (Threshold).
The Dynamic meter indicates the amount of
gain reduction on the Output of the delay.
Preset Number
These three seven segments will display the
current preset. The icons below will indicate
whether it is Factory or User presets.
Edited
This icon will be lit as soon as the current
preset has been modified but not yet stored.
Factory/User
Shows whether you are operating in the
Factory or User bank.
MIDI In
Shows incoming MIDI information.
Text Line
This 20 character text line is used to display
preset names, parameter names etc.