manualshive.com logo in svg

TC Communications TC3720, User Manual

Share
Download
TC Communications TC3720 User Manual Download Page 32

- 32 -

TC3720

User's Manual

Rev. 1.5

Chapter 7 - Specifications

Electrical

Data Rates ................................................................................... 10Mbps/100Mbps
Connectors ...........................................................RJ-45 Female, DB9 Serial Port

Optical

Refer to pages 5 and 6

Visual Indicators

System status ................... PWR A, PWR B, Vcc1, Vcc2, ALARM, MSTR/SLVE,

.................................................................................................................. F1/1X,F2/2X

Ethernet Signal Status ...................... 100M, FULL/COL, LINK/ACT(each port)

Optical Signal Status .......................  100M, FULL/COL, LINK/ACT (each port)

Alarm

Dry Contact .......................................................................................... Normal Open

Power Source

Standard ..........................................................................................12VDC @500mA

Optional ..................................................................... 24VDC, -48VDC, 125VDC, or

....................................................... 115/230VAC with an external power adapter

Temperature

Operating ..............................................................................................-10

o

C to 50

o

C

..........................................................................  Hi-Temp (Optional) -20

o

C to 70

o

C

............................................... Hardened Temperature (Optional) -40

o

C to 80

o

C

Humidity ................................................................................. 95% non-condensing

Physical (Standalone/Rackmount unit)

Height ................................................................................................ (3.53 cm) 1.75"

Width ................................................................................................(48.26 cm) 19.0"

Depth ................................................................................................. (16.57 cm) 6.5"
Weight ............................................................................................(544 gm) 1.2 Lbs

Summary of Contents for TC3720






































Reviews:

No comments

Brands by name

Popular brands

Load more brands