• 100 BaseT transmision; Network speeds up to 150 Mbps*; Up to 8,000ft (2,500m)*
• Powers PoE, PoE+, or High Power PoE cameras (or other PoE devices), up to 50 watts*
• Dual 1000BaseT uplink ports (RJ45 & SFP)
• Use with NV-ET1801 or NV-ET1804 TBus Transmitters
• One TBus port at the network-end can support multiple remote Transmitters/IP cam-
eras
• 56 VDC is distributed over the TBus to all connected equipment
• Easy configuration, no PC required; Browser based moitoring & control available
• Transparently supports all networking protocols (UDP, TCP/IP, HTTP, Multicast*, etc.)
• 128-bit AES encrypted transmission; Built-in transient protection
The NVT Model NV-ER1816i TBus Sixteen Port PoE+ Receiver Hub is a 1U 19” rack-
mountable bus-architected ethernet switch, that together with remote TBus transmitters, is
capable of supporting up to 64 10/100 BaseT Ethernet and PoE+ powered devices.
The TBus transmission medium can be coax, 2-wire/UTP, or Shielded Twisted-Pair. Data
rates up to 150 Mbps are achievable, making these devices the ideal choice in new or legacy
installations where existing cable is re-deployed as part of an upgrade to IP cameras.
An internal 250 watt 56 VDC power supply can be optionally augmented by an external 250
watt auxiliary power supply, supporting redundancy and/or higher power applications.
The NV-ER1816i is backed by NVT’s award winning customer suooprt, limited lifetime war-
ranty, and advance replacement. No IP or MAC addressing configuration is required, yet is
available for browser-based monitoring and control. This provides exceptional yet simple
configuration and diagnostics for the installer or remote monitoring facility. Status LEDs
indicate power, Ethernet/PoE, and TBus connectivity/activity.
* Distance and number of devices supported may be lower due to power supply capacity and wire voltage-drop. See Wire Distance
Charts on page 8. Aggregate TBus bandwidth is dynamically allocated (shared based on traffic), and decreases with wire distance. See
Wire Distance Chart on page 9. Multicast requires an IGMP Querier, either in a network switch, or in the NV-ER1816i Receiver Hub. High
Page 2 of 25
PRODUCT OVERVIEW
Network Video Technologies
(+1) 650.462.8100 • +44 (0) 208 977-6614
nvt.com • [email protected]
Sixteen Port PoE+ Receiver Hub
Model NV-ER1816i
1
NV-ER1816
2
1
3
1
4
1
5
1
6
1
11
2
3
4
5
6
7
8
9
0
1
Auxiliary
Join
Link
10/100/1000
10/100/1000
Main
Power
16-Port Ethernet Receiver
USE ONL
Y
WITH A 250V FUSE
(no an
alog
/ no ether
net)
OUTPUTS: 56VDC 1AMP MAX. PER PORT, 4.5A MAX, TOTAL
