4
Frame rate:
Supports to 60fps maximum. More frame rates, video will be more smooth.
For this Encoder, the maximum performance/ability is 1-channel 1920x1080p_60hz in and then
Encoder to 1-channel 1920x1080p_60fps out.
Please to balance the resource for all encode processing. If encode processing out of the
maximum performance/ability, Encoder could not work properly.
For example, HDMI channel encode to 1920x1080_60fps and also Mix channel encode
1920x1080_60fps.This means there’re 2-channel 1920x1080_60fps encoding simultaneously. It’s
over the maximum performance/ability.
You can HDMI channel to 1920x1080_30fps while Mix channel to 1920x1080_30fps
simultaneously.
Network stream:
Network stream in for protocol-converting, or for channel mix. http, hls, rtsp, udp, srt stream is
suitable.
Enable: means do not change any codec of the network stream. For protocol-converting;
Video decode & audio decode: may change codec of the network stream, input to do
transcoding.
This Encoder does not support “B-frame encode” network stream in.
There’re tricks to help you get more video quality:
1.
For example, If your source is 1920x1080_60_hz in, please encode to 60fps or 30fps out; If
your source is 50hz in, please set “Encode” to 50fps or 25fps out.
2.
Some media content like sport channel which is moving fast, please try smart P or Dual P
encode. Like this:
Stream:
Output configure
It supports http, hls, rtsp, rtmp/rtmps, udp unicast/multicast, srt, ndi | hx.
