7
PRECAUTIONS AND MAINTENANCE
•
When initially melting a full reservoir of solid paraffin pellets, please allow
approximately 3 hours. For laboratories that are constantly replenishing large
amounts of paraffin, we recommend that you keep your unit set at
62°C
to
65°C
.
Your meltdown time will be significantly decreased.
•
The Paraffin Dispenser is designed to run continuously to maintain large
volumes of molten paraffin; however, any power surge or disruption will activate
the safety cut-off switch, shutting the unit off. TBS recommends that the unit be
connected to a surge protector or some form of uninterrupted power source to
ensure against such disruptions.
•
Occasionally check the filter located in the bottom of the paraffin well, as particle
buildup may interfere with the flow volume. The spigot can be removed and
cleaned in the event that clogging does occur. Simply loosen the knurled knob at
the front of the spigot (
IMPORTANT:
please ensure that the reservoir is empty)
and use forced air to clean the valve. Avoid probing the spigot valve with sharp
objects, as they may puncture the seal.
•
A spare 6.3 amp fuse is provided in the fuse holder located in the power entry
module in the rear of the unit.
