tbs electronics CROSSFIRE (XF), Manual

Page: 50 / 57

Firmware ​ ​ upgrade
Updates ​ ​ to ​ ​ the ​ ​ transmitter ​ ​ and ​ ​ receiver ​ ​ is ​ ​ applied ​ ​ using ​ ​ our ​ ​ TBS ​ ​ Agent ​ ​ software. ​ ​ This ​ ​ takes ​ ​ care ​ ​ of ​ ​ all ​ ​ the
downloading ​ ​ of ​ ​ the ​ ​ latest ​ ​ firmware, ​ ​ verification- ​ ​ and ​ ​ upgrade ​ ​ process.
Installing ​ ​ TBS ​ ​ Agent
Download ​ ​ the ​ ​ installer ​ ​ from ​ ​​ http://www.team-blacksheep.com/corepro/agent ​ ​ ​ (Windows7/8/10+, ​ ​ 64-bit
required) ​ ​ - ​ ​ no ​ ​ drivers ​ ​ needed ​ ​ to ​ ​ use ​ ​ the ​ ​ application, ​ ​ but ​ ​ an ​ ​ Internet ​ ​ connection ​ ​ is ​ ​ required ​ ​ to ​ ​ download
the ​ ​ latest ​ ​ firmware ​ ​ versions.
Turn ​ ​ off ​ ​ the ​ ​ radio ​ ​ or ​ ​ disconnect ​ ​ any ​ ​ model ​ ​ batteries. ​ ​ Plug ​ ​ in ​ ​ a ​ ​ micro-USB ​ ​ cable ​ ​ on ​ ​ the ​ ​ transmitter ​ ​ or
receiver,
​ ​
power
​ ​
is
​ ​
provided
​ ​
via
​ ​
USB.
​ ​
The
​ ​
software
​ ​
will
​ ​
automatically
​ ​
detect
​ ​
the
​ ​
device
​ ​
and
​ ​
offer
​ ​
you
​ ​
the
option ​ ​ to ​ ​ upgrade ​ ​ the ​ ​ firmware ​ ​ if ​ ​ a ​ ​ newer ​ ​ version ​ ​ is ​ ​ available. ​ ​ If ​ ​ you ​ ​ like ​ ​ beta ​ ​ versions, ​ ​ press ​ ​ F1 ​ ​ and
enable ​ ​ the ​ ​ checkbox.
When ​ ​ the ​ ​ status ​ ​ indicator ​ ​ is ​ ​ green ​ ​ and ​ ​ says ​ ​ “Connected”, ​ ​ you ​ ​ can ​ ​ upgrade ​ ​ or ​ ​ downgrade ​ ​ the ​ ​ firmware.
To ​ ​ upgrade ​ ​ the ​ ​ firmware, ​ ​ select ​ ​ the ​ ​ latest ​ ​ version ​ ​ from ​ ​ the ​ ​ drop-down ​ ​ menu ​ ​ and ​ ​ click ​ ​ Update. ​ ​ You ​ ​ can
also ​ ​ upgrade ​ ​ the ​ ​ Crossfire ​ ​ receiver ​ ​ via ​ ​ the ​ ​ CORE ​ ​ PRO ​ ​ if ​ ​ it ​ ​ is ​ ​ connected ​ ​ on ​ ​ BST. ​ ​ Rapid ​ ​ blinking ​ ​ indicates ​ ​ that
the ​ ​ process ​ ​ is ​ ​ working ​ ​ and ​ ​ being ​ ​ updated. ​ ​ The ​ ​ process ​ ​ will ​ ​ take ​ ​ about ​ ​ 1 ​ ​ minute. ​ ​ Check ​ ​ all ​ ​ settings ​ ​ after
the ​ ​ process ​ ​ is ​ ​ finished.
45