TBM TB1101, Instruction Manual

Page: 43 / 49

43
replace parts.
8. Body
8.1 Top hook pin
hole on the
side plate
Measure the dimension D.
Capacity (t) D1 (Standard) D (Discard)
0.75 10.2 ≤10.7
1.5 13.2 ≤13.7
3 17.2 ≤17.7
Contact an
authorized
service center
or a qualified
inspector to
replace parts.
8.2 Top hook pin Measure
Contact an authorized service center or a qualified in-
spector to replace parts. Contact an
authorized
service center
or a qualified
inspector to
replace parts.
8.3 Guide plate
Check visu-
ally Contact an authorized service center or a qualified in-
spector to replace parts. Contact an
authorized
service center
or a qualified
inspector to
replace parts.
8.4 Chain stopper
ring
Check visu-
ally
Contact an authorized service center or a qualified in-
spector to replace parts. Contact an
authorized
service center
or a qualified
inspector to
replace parts.
9. Function
7.1 Lifting and low-
ering
Lift and
lower a
light load
No abnormal difficulty in lifting and lowering.
Contact an
authorized
service center
or a qualified
inspector for
overhaul and
service
9.2 Brake
Lift and
lower a
light load
Confirm that none of the problems listed below occur
during lifting and lowering:
1. Lifting impossible.
2. Load slips down slowly.
3. Load falls when the operator releases the hand lever.
Contact an
authorized
service center
or a qualified
inspector for
overhaul and
service