17
9.1 IR CABLE
The IR cable is an external remote control receiver.
9.2 PIR SENSOR
Application 1:
The PIR is an external remote control receiver.
Application 2:
The PIR is a motion detector.
9. OPTIONAL AUXILIARY EQUIPMENT
18
Situation
Check Point
No Picture
1. Check if the power supply is connected.
2. Make sure the MPL020 S is turned on.
No response from
the remote
control
1. Make sure there is a clear view between the remote
control and the device.
2. Change the remote control’s batteries.
Memory card
1. Push cards gently and securely.
2. If the card does not insert easily, check the direction.
3. Confirm format of the card.
MPL020 S supports CF, SD, MMC and MS (Pro) memory
card.
No sound
1. Check if the mute function is on.
2. Check if the volume is turned up.
Timer inaccuracy
(optional)
1. Press “ EDIT ” key to open the timer setup window, confirm
whether time is correct.
2. If using the “ Timer Function ”, it is suggested to check
whether the time is correct every three months.
The Laser Scanner
is on, but cannot
read bar-codes
(optional).
1. The scanner window is dirty and must be cleaned.
2. The presented barcode type is not enable. (refer to 8)
3. The barcode type presented is not supported .
10. TROUBLESHOOTING