18
Network Camera User Manual
1. Enable object removal detection and then select the detection type.
Enable Left Detection
: The relevant alarms will be triggered if there are items left in the
pre-defined alarm area.
Enable Item Missing Detection
: The relevant alarms will be triggered if there are items
missing in the pre-defined alarm area.
2. Set the alarm holding time and alarm trigger options. The setting steps are the same with
that of motion detection. Please refer to motion detection chapter for details.
3. Click “Save” button to save the settings.
4. Set the alarm area of the object removal detection. Click “Area” tab to go to the interface as
shown below.
Set the alarm area number and then input the alarm area name on the right side. You can add
4 alarm areas at most.
Click “Draw Area” button and then click around the area where you want to set as the alarm
area in the image on the left side (the alarm area should be a closed area). Click “Stop Draw”
