Model LR-2066 & LR-2866A Hoist Installation and Operation Manual
Stock No. 03 5839
Page 18 of 21
"OPERATION OF BODY PROP"
WARNING:
Being under a raised body can result in serious injury or death should the body
unexpectedly descend.
Never
position yourself or allow others to position themselves
under a
loaded
body.
Always
prop the
unloaded
body up using the body prop or body
props supplied.
Remember,
body props are to be used only on an
unloaded
body.
When two props are provided, both props must be used.
Below is a step-by-step procedure for using the body prop.
1.
Raise body to sufficient height and shut off all power.
2.
Grasp prop handle at arms length and rotate prop upwards.
3.
Swing prop up to vertical position and push down until prop locks in line with support bracket
on the body.
4.
Using inside-the-cab controls, lower body slowly until prop contacts prop cup.
CAUTION:
Do not power hoist down while on prop.
5.
To lower prop for normal operation, "reverse" the procedure of the above four steps.
