1309630B
2013-12-10
8
lOcatE spREaDER MOunts
Locate the spreader mounting brackets to the outside of the spreader and to the outside of the rear corner
posts of the dump body as shown in Fig. 4. Clamp them in place.
Fig. 4
Depending on the overall widths of the body and spreader, it might be necessary to put shims under the
spreader mounts. If needed, install these shims before welding the spreader mounts to the body and to the
spreader. Weld the mounts to the body and to the spreader as shown in Fig. 5.
weld
weld
Fig. 5
