background image

1309630B

2013-12-10

2

DATE PURCHASED __________________________________________________________________

 

SPREADER SERIAL NUMBER 

______________________________________________________

 

DEALER 

 

__________________________________________________________________

 

ADDRESS   

__________________________________________________________________

 

PHONE 

 

__________________________________________________________________

FOREWORD

This tailgate spreader is designed to fit 96 inch wide dump bodies.  It is available in six configurations to 

match the desired sand or salt delivery rate and the body design.  

This manual contains information for mounting the tailgate spreader on a dump body. Study it carefully 

before attempting to mount the tailgate spreader. With proper installation, use, and regular maintenance, 

the tailgate spreader will give many years of trouble free service.

When  ordering  parts,  be  sure  to  give  the  serial  number  of  the  tailgate  spreader.  The  seri-

al  number  of  the  spreader  is  stamped  into  the  right  end  (passenger  side)  panel  near  the  au-

ger  drive  motor.  For  future  reference,  record  this  number  NOW  in  the  space  provid-

ed  above.  Order  parts  by  number  and  description  as  given  in  the  parts  listing  in  this  manual. 

Summary of Contents for CRYSTEEL'S













Reviews: