Energier Apollo User Manual
TBB Power Co.
，
Ltd
About this Manual
This manual describes our product features and provides procedure of installations. This manual
is for anyone intending to install our equipment.
General Instruction
Thanks for choosing our products and this manual were suitable for Energier Apollo.This chapter
contains important safety and operation instructions. Read and keep this User Guide well for later
reference.
The Energier Apollo needs to be installed by professionals and please pay attention to the following
points prior to installation:
1> Please check the input voltage or voltage of battery is same to the nominal input voltage of
this inverter.
2> Please connect positive terminal “+” of battery to “+” input of the inverter.
3> Please connect negative terminal “-” of battery to “-” input of the inverter.
4> Please connect positive terminal “+” of photovoltaic panel to “PV+” input of the inverter.
5> Please connect negative terminal “-” of photovoltaic panel to “PV-” input of the inverter.
6> Please use the shortest cable to connect and ensure the secure connection.
7> While connecting, please secure the connection and avoid short cut between positive terminal
and negative terminal of battery, which will cause damage of battery.
8> Inverter will have high voltage inside. Only authorized electrician can open the case.
9> The inverter WAS NOT designed to use in any life retaining equipment.