Quit
Troubleshooting
Freezing cylinder walls are scored.
Cause: The front bearing is missing or worn.
Remedy: Install or replace the front bearing
on the back of the freezer door.
Cause: The scraper blades and/or blade clips
are damaged.
Remedy: Replace the scraper blades and/or
clips.
Cause: Unit was placed in AUTO before all
sanitizing solution was removed from freezing
cylinder.
Remedy: Place unit in AUTO only after
priming is complete and all sanitizing solution
is removed.
Cause: Broken pins on beater assembly.
Remedy: Repair or replace the beater
assembly. Be sure the scraper blades are
properly seated on pins.
Cause: The beater assembly is bent.
Remedy: Repair or replace the beater
assembly. Contact an authorized service
technician to correct the cause of insufficient
mix in the freezing cylinder.
