E
N
G
3
To maximize battery life:
Press and hold the ‘ON-ZERO-OFF’ button for
2 seconds to switch the scale and timer off at any time.
MANUAL SWITCH OFF
AUTO SWITCH OFF
Automatic switch off occurs if the display shows 0 for 1
minute or shows the same weight reading for 3 minutes.
Note
: If the timer is running the scale will automatically
switch back to display the timer.
CLEANING AND CARE
Clean the scale with a slightly damp cloth. DO NOT immerse the scale in water or use chemical/abrasive
cleaning agents.
All plastic parts should be cleaned immediately after contact with fats, spices, vinegar and strongly
flavored/colored foods.
The chopping boards are removable and top rack dishwasher safe.
WARNING INDICATORS
Weigh overload.
Battery low.
Replace battery.
TEN YEAR LIMITED WARRANTY
Taylor® warrants this product to be free from defects in material or workmanship for ten (10) years for the original
purchaser from date of original purchase. It does not cover damages or wear resulting from accident, misuse, abuse,
commercial use, or unauthorized adjustment and/or repair. If service is required, do not return to retailer. Should this
product require service (or replacement at our option), please pack the item carefully and return it prepaid, along with
store receipt showing the date of purchase and a note explaining reason for return to:
Taylor Precision Products, 2220 Entrada Del Sol, Suite A, Las Cruces, New Mexico 88001 USA
There are no expressed warranties except as listed above.This warranty gives you specific legal rights, and you may have
other rights which vary from state to state.
For additional product information, or warranty information in Canada or elsewhere outside the USA, please contact us
through www.taylorusa.com.
© 2009 Taylor Precision Products and its affiliated companies, all rights reserved.Taylor® and Leading the Way in Accuracy®
are registered trademarks of Taylor Precision Products and its affiliated companies. All rights reserved.
Made to our exact specifications in China. Not legal for trade www.taylorusa.com
1x CR2032.
/-
terminals are the
correct way
round.
BATTERY
NOTE
To preserve the accuracy of the scale we recommend
that you first weigh the item whole then remove the
board and item to a stable work surface for chopping
