E
N
G
2
1)
If using a chopping board (included) and/or bowl
(not included), place on the platform before
switching the scale on.
2)
Press ‘ON-ZERO-OFF’ button to turn the
scale on.
3)
Wait until the display shows zero.
USING THE SCALE
Thank you for purchasing a Taylor® Kitchen Scale. Please read this instruction manual carefully before use. Keep these
instructions handy for future reference.For more information on NBC's The Biggest Loser, or to join The Biggest Loser
Club, please visit the official Biggest Loser website at www.nbc.com/The_Biggest_Loser.com or www.biggestloserclub.com.
Get a free diet profile at www.biggestloserclub.com
The Aquatronic liquid measure feature is suitable for all water based liquids, including wine, milk,
stock, cream etc.
Note
: Oils have a lower specific gravity, which will result in a volume reading of 10%.
If measuring oils by volume on this scale, please adjust for this accordingly.
USING THE AQUATRONIC FEATURE TO MEASURE LIQUID INGREDIENTS
To weigh several different ingredients, press
‘ON-ZERO-OFF’ to reset the display between each
ingredient.
TO ADD AND WEIGH
TO SWITCH ON
TO CONVERT WEIGHT UNITS
To convert between grams (g), pounds and ounces (lb.oz),
milliliters (ml) and fluid ounces (fl.oz) press ‘UNIT’
button at any time during weighing.
TO OPERATE THE TIMER
1)
Switch the scale on then press the ‘START-STOP-RESET’ button to obtain a
00:00
display.
The timer symbol
will now be displayed.
2)
Press the ‘SET’ button to increase the countdown time (from 1 to 99 minutes) – either use a
single press to advance one minute at a time – or press and hold to advance continuously until button
is released.
3)
Press the ‘START-STOP-RESET’ button to start the countdown.
4)
The timer display will show both minutes and seconds when counting down.
5)
When the countdown reaches
00:00
, the alarm will sound and
00:00
will flash on and off for 1 minute.
6)
The ‘START-STOP-RESET’ button can be pressed to silence the alarm.
7)
During countdown the ‘START-STOP-RESET’ button can be pressed to pause and restart the countdown
as required.
8)
When the countdown is paused press and hold the ‘START-STOP-RESET’ button to reset the timer to 00:00.
Note
: At any time during timer countdown, the ‘ON-ZERO-OFF’ button can be pressed to return to a scale display.The
timer symbol will remain on the display and the countdown will continue to run in the background.When the countdown
reaches zero the alarm will sound.
