SAFETY
PROTECT YOURSELF AND OTHERS !
Read and understand these safety notices.
1. ELECTRICAL
No portion of the outer cover of the welding controller should be re-
moved by anyone other than suitably qualified personnel and never whilst
mains power is connected. ALWAYS disconnect the mains plug from the
socket.
RISK TO LIFE !!!
BE AWARE ! This equipment contains a sealed power supply module
which operates on high frequency inverter principles.
Due to the potentially fatal voltages in this module we do
not recommend tampering with the module. It can be
safely removed and replaced via our factory exchange
system.
BE AWARE ! Capacitors store electrical energy. Check for residual
charge before carrying out any internal maintenance.
DO NOT ! use any fluids to clean electrical components as these
may penetrate into the electrical system
Installation must be according to the setting up procedure detailed on
page 10 of this manual and must be in line with national, regional and local
safety codes.
2. FIRE
During welding small particles of very hot metal are expelled. Ensure
that no combustible materials can be ignited by these.
7
Summary of Contents for SYSTEM CD200 SERIES
Page 44: ...EMC CERTIFICATE 42...
