Page 2 of 4
INSTRUCTIONS FOR ASSEMBLING MECO OMAHA
SERIES 1000 MEDIUM DUTY CANTILEVER RACKS
DO NOT SUBSTITUTE HARDWARE
TIGHTEN FINGER TIGHT ONLY AT THIS STEP
DIAGRAM A
SINGLE SIDED UPRIGHT TO
BASE CONNECTION
DIAGRAM B
DOUBLE SIDED UPRIGHT TO
BASE CONNECTION
Single base channel
Double base
channel
1
/
2
x 1
1
/
4
bolt
(HK48)
Base End
1
/
2
hex nut
(HK48)
1
/
2
x 1
1
/
4
bolt
(HK07)
Refer to
DIAGRAM A
for a single sided
rack and
DIAGRAM B
for a double
sided rack.
1.) Attach one of the base channels to
the upright. Attach upright to base
with
1
/
2
x 1
1
/
4
bolts, hex nuts and
lock washers. Bolts are required in
all holes.
2.) Attach the base end to the front of the base channel using
(2)
1
/
2
x 1
1
/
4
bolts, hex nuts, and (4)
1
/
2
flat washers. For
double sided bases attach another base end to the
opposite end of the base channel using (2)
1
/
2
x 1
1
/
4
bolts,
hex nuts and (4)
1
/
2
flat washers.
3.) Attach the other base channel to the other side of the
upright using
1
/
2
x 1
1
/
4
bolts, hex nuts and lock washers.
Attach this base channel to the base end(s) using (2)
1
/
2
x
1
1
/
4
bolts, hex nuts and (4)
1
/
2
flat washers per base end.
4.) If base lips are supplied, they should be attached at
this time using one
1
/
2
x 1
1
/
4
bolt and hex nut per base
lip.
Base Lip
(supplied only
when arms are
ordered with
lips)
1
/
2
lock washer
(HK07)
IMPORTANT:
Bases must be anchored to the floor.
OCTOBER 2013
Anchor Hole
