V
-
21A
16
WELD SETTINGS
The following pages (17 to 22) detail the suggested settings for the following
models :
M8, M9 & M10
both Contact & Lift Gap
The setting charts were established with the performance of repetitive weld tests
using the standard equipment's specified above, studs manufactured to the BS EN
ISO 13918 standard, in the following materials :
Mild Steel, Grade St37
-
3
Stainless Steel, Grade 1.4303
Aluminium Alloy, Grade AlMg3
and sheet materials of the following types :
1.6 mm Thick, Mild Steel, Grade CR4
1.6 mm Thick, Stainless Steel, Type S304
1 mm Thick, ZINTEC Coated Mild Steel, Grade CR4
1.6 mm Thick, Aluminium Alloy, Grade HE3, Half Hard
The settings are given
only as a general guide
and it is recommended that sample
welds be carried out on your own material, as quality of materials and site
conditions may vary from user to user.
Summary of Contents for M8
