6 - Clear Button
(Receiver Unit)
To delete Max/Min Memory record, press while the
respective values are displayed on the readout.
7 - F°/C° Button
(Remote Unit)
Press to select F° or C° temperature scale.
Note:
Temperature scale selected on receiver unit will
control what is displayed.
8 - TM Button
(Remote Unit)
Press to send a transmission signal to receiver unit.
9 - Battery Compartment
The receiver unit and the remote unit each require 2AA
Alkaline batteries (see Battery Installation in How To Set
Up Your Wireless Thermometer section of this manual).
10 - Table Stand
Allows stable placement of units on a flat surface. To
access on both the receiver and remote units, pull
bottom of stand out from housing.
11 - Wall Mount
The receiver features a recessed key hole and the remote
features a detachable holder with a key hole slot to
secure each unit to a wall.
12 - Cable Jack
(Remote Unit)
For use with optional, additional remote sensor unit(s) only
sold separately(Model 1459). Plug sensor probe of 11-foot
cable into jack to measure temperature in liquids (aquarium,
swimming pool, hot tub, etc.)
Main Features (continued)
3
