Battery Installation
(continued)
How to Read Temperatures and Other Displays
8
Important:
When the temperature falls below
freezing point, the batteries of outdoor units may
freeze, lowering their voltage supply and effective
range. Use Lithium batteries to insure operation
below 10°F (-12° C).
5.
Press the F/C button to select the desired
temperature measurement scale.
6.
The remote will automatically send a
transmission to the receiver. The red LED
Indicator light will flash when a signal is
transmitted. Remote unit temperature
updates will then be transmitted at 2 minute
30 second intervals.
Note: If dashes are still displayed on the
receiver unit, press the TM button to send a
transmission.
7.
Replace the battery compartment cover,
replace and tighten screws and reattach the
bracket stand.
•
The top half of the receiver display will show
the temperature, humidity and heat index of
one remote unit (set to Channel 1). If more
than one remote unit is set, simply press the
Channel button on the receiver unit until it
correlates to the designated channel of the
second /third remote location(s).
