![background image](http://html1.mh-extra.com/html/taylor/i16/i16_operating-manual_3768425012.webp)
V
-
1C
12
SETTING UP AND WELDING
If optional shielding gas is to be used during welding. Attach the
bottle supply to the controller via the front panel using a suitable
self
-
sealing push
-
on socket.
Connect the gas pipe from the pistol to the output socket on the
front panel (optional).
If the mains supply is switched. Turn
ON
the mains supply.
Turn
ON
the controller using the switch on the front panel. The
controller will run through a start
-
up self
-
test during which the
multi
-
function display will cycle through a welcome screen and
show the current firmware version etc. also various indicators
etc. on the front panel will flash, before settling to a display
showing the last user setup. At this point the controller is ready
to use at the settings employed during the previous operating
period.
However. If a settings change is required it is possible to do so
from this point by pressing the control knob. This will toggle the
display. The display will show 2 options:
-
>
Change
Load
With the indicator (
-
>) aligned with the word Settings.
The 2 options offer alternative paths to achieve the required
welding parameter set up for the job in hand. Option
Change
is
used to manually select a new set of parameters for the next
welding operation.
Whilst option
Load
is used to load a set of pre
-
existing welding
parameters from the controllers internal memory.