C712 Operator Training
-17-
Priming
Note: Use only FRESH MIX when priming the freezer.
Step 1
Place an empty mix pail beneath the door spouts. With the prime plug in the UP
position, pour 2-1/2 gallons (9.5 liters) of FRESH mix into the mix hopper and allow
it to flow into the freezing cylinder. Open the draw valve to remove all sanitizing
solution. When only fresh mix is flowing, close the draw valve.
Step 2
Once a steady stream of mix starts to flow from the prime plug opening in the bottom
of the freezer door, push the prime plug down.
Step 3
When mix stops bubbling down into the freezing cylinder, remove the cotter pin from
the outlet fitting of the mix pump. Insert the outlet end of the mix feed tube into the
mix inlet hole in the mix hopper. Place the inlet end of the mix feed tube into the outlet
fitting of the mix pump. Secure with cotter pin.
Step 4
Select the AUTO symbol.
Fill the hopper with fresh mix and place the mix hopper cover in position.
Repeat these steps for the other side of the machine.
___________________________________________________________________________
___________________________________________________________________________
___________________________________________________________________________
___________________________________________________________________________
___________________________________________________________________________
___________________________________________________________________________
___________________________________________________________________________
___________________________________________________________________________
___________________________________________________________________________
___________________________________________________________________________
___________________________________________________________________________
___________________________________________________________________________
Summary of Contents for C712
Page 1: ...Model C712...
Page 2: ......
