C712 Operator Training
-12-
Freezing Cylinder Checklist
1. Replace scraper blades if they are nicked or damaged. Before installing the beater, be certain
that the scraper blades are properly attached.
2. Check the rear shell bearing for signs of wear (excessive mix leakage in the side drip pan) and
be certain it is properly cleaned.
3. Using a brush and cloth towel, keep the rear shell bearing and the female hex drive socket
clean and free of lubricant and mix deposits.
4. Dispose of o-rings and seals if they are worn, torn, or fit too loosely. Replace with new ones.
5. Follow all lubricating procedures as outlined in "Assembly"
6. Check the condenser and filter for accumulation of dirt and lint. A dirty condenser or filter will
reduce the efficiency and capacity of the machine. The condenser should be cleaned monthly
with a soft brush. The filter should be cleaned weekly.
7. On water cooled units, check the water lines for kinks or leaks. Kinks can occur when the
machine is moved back and forth for cleaning or maintenance purposes. Deteriorated or
cracked water lines should be replaced only by an authorized Taylor Technician.
___________________________________________________________________________
___________________________________________________________________________
___________________________________________________________________________
___________________________________________________________________________
___________________________________________________________________________
___________________________________________________________________________
___________________________________________________________________________
___________________________________________________________________________
___________________________________________________________________________
___________________________________________________________________________
___________________________________________________________________________
___________________________________________________________________________
Summary of Contents for C712
Page 1: ...Model C712...
Page 2: ......
