USER INTERFACE
5-3
Models 8752, 8756, and 8757
User Interface
5
WASH
When the Wash button is pressed, the indicator lights
illuminate to indicate that the beater motor is operating.
The Standby or Auto modes must be canceled first to
activate the Wash mode.
AUTO
When the AUTO button is pressed, the indicator lights
illuminate to indicate that the main refrigeration system
has been activated. In the Auto mode, the Wash or
Standby functions is automatically canceled. The Mix Ref
function is automatically locked in to maintain the mix in
the cabinet, and the Pump function is locked in to allow
air/mix pump operation as required.
Pump
When the PUMP button is pressed, the indicator lights
indicate that the air/mix pump will operate as required.
Note:
An indicating light and an audible tone will sound
whenever a mode of operation has been pressed. To
cancel any function, press the PUMP button again and
the light and mode of operation will shut off.
Standby
(US and Canada Only)
During long no-sale periods it becomes necessary to
warm product in the freezing cylinder to approximately
35°F to 40°F (1.7°C to 4.4°C) to prevent overbeating and
product breakdown.
When the STANDBY button is pressed, the light comes
on, indicating the cylinder temperature retention system
(CTR) has been activated. In the Standby mode, the
Wash, Pump, and Auto functions are automatically
canceled. The Mix Ref function is automatically locked in
to maintain the mix in the cabinet.
To resume normal operation, press the AUTO button.
When the machine cycles off, product in the freezing
cylinder will be at serving viscosity.
Note:
A mode indicator will light and an audible tone
will sound whenever a mode of operation button has
been pressed. To cancel any function, press the button
again and the light and mode of operation will shut off.
Adjustable Draw Handle
These machines feature an adjustable draw handle to
provide the best portion control, giving a better,
consistent quality to your product and controlling costs.
The draw handle should be adjusted to provide a flow
rate of 5 oz. to 7-1/2 oz. (142 g to 213 g) of product by
weight per 10 seconds. To increase the flow rate, turn the
screw counterclockwise. To decrease the flow rate, turn
the screw clockwise.
In addition, for purposes of sanitizing and rinsing, the flow
rate can be increased by removing the pivot pin and
placing the restrictive bar on the top. When drawing
product, always have the restrictive bar on the bottom.
Important!
When dispensing product, pull only one draw
handle at a time.
Summary of Contents for 8757
Page 14: ...3 4 SAFETY Models 8752 8756 and 8757 Safety 3 Notes...
Page 28: ...5 4 USER INTERFACE Models 8752 8756 and 8757 User Interface 5 Notes...
Page 52: ...9 2 PARTS REPLACEMENT SCHEDULE Models 8752 8756 and 8757 Parts Replacement Schedule 9 Notes...
Page 58: ...11 4 LIMITED WARRANTY ON PARTS 8752 8756 and 8757 Limited Warranty on Parts 11 Notes...
